镇江附近想过夜电话联系

Please select the language: chinese / ENGLISH

Ltf-mseries high speed coater


Main structural features

Unwinding: independent tower type double position discharging frame, automatic cutting for changing coil, pneumatic shaft plus safety chuck for loading and unloading coil, unwinding EPC device.
Rewinding: independent tower type double station take-up frame, flying knife cutting, surface coiling, constant tension winding.
Gluing: wire roller gluing mode, roller independent motor drive, pneumatic reset.
Oven: six section top open high constant temperature drying oven, the whole oven adopts negative pressure design, hot air does not blow out of the oven, large air volume and high air pressure can create low temperature and high wind speed drying mode. The guide roller is driven by single motor and driven by synchronous belt with low noise.
Compound: three roll compound press roller device, which can ensure the uniform pressing force in the whole area; S-type double cooling roller.
Whole machine: PLC programmable controller is used for logic control and protection, four section closed-loop tension control and display, and all transmission systems adopt


Main technical parameters

Applicable materials Plastic film, paper, aluminum foil and other reel materials
Mechanical speed 160m/min
Material width
850. 1050. 1250. 1450. 1650mm
Winding and unwinding diameter Ф600. 800. 1000 mm
Coating method Wire roller
Drying method Electric heating, steam heating or heat conducting oil heating or gas heating


Related information
 —
Lwf-1300series solventless laminating machine

The main structural features of the winding: it can realize the biaxial bi-directional retraction and retraction of materials, and adopts the DC bus motion controller imported from Europe to effectively ensure the tension control

19-11-12
 —
Ltf-m high speed composite coater

Main structural features of high-speed composite coating machine: independent tower type double position discharging frame for coil changing, automatic cutting, air expanding shaft and safety chuck for loading and unloading coil, unwinding EPC device, winding up, etc

19-11-12
contact information
Jiangyin Lida printing and Packaging Machinery Co., Ltd
Address: 683 Xizhang Road, Gushan Town, Jiangyin City, Jiangsu Province
Tel: 0510-86953860
0510-863562587
Fax + 86-0510-86358777
Website: willbefamous.com
E-mail:lida@willbefamous.com