镇江附近想过夜电话联系

Please select the language: chinese / ENGLISH

Compound coater equipment

Release date: January 22, 2017 08:40

Compound coater Working process: substrate roll, such as: paper, cloth, leather, aluminum foil, plastic film, coater has a layer of special function plastic, paint or ink, and drying. How the composite coater works: the principle of screen printing automatic composite coater is the same, but its performance varies with the model and manufacturer. The screen composite coating machine is provided with a device for clamping the frame in the vertical frame. The front and rear parts of the screen area are the horizontal coating mechanism, which is composed of a coating groove and a mechanical or pneumatic component that controls the angle and pressure of the coating groove.
 
Compound coater Equipment, working process: substrate roll, such as: paper, cloth, leather, aluminum foil, plastic film, coater has a layer of special function plastic, paint or ink, and drying.
 
Compound coater How to work: the principle of automatic coater is the same, but its performance varies with model and manufacturer. The coater is provided with a device for clamping the frame in the vertical frame. The front and rear parts of the screen area are the horizontal coating mechanism, which is composed of a coating groove and a mechanical or pneumatic component that controls the angle and pressure of the coating groove.
 
Compound coater Both ends of the mechanism are installed on the vertical support arm of the composite coating machine, and the composite coating mechanism moves up and down along the screen surface through belts, chains or cables. The drive mechanism is connected to a servo or variable frequency motor for smooth operation and control of the position of the composite coating mechanism.
 
Before coating, a clean template screen is loaded from the front of the composite coater, and some models can also be screened from the side. Side mounted forms are more common in large frame designs because of the large, bulky side mounted form of the frame, which provides less movement. When the automatic coater is combined with other automatic screen processing devices such as cleaning device, regeneration device, drying device and developing device, it can be easily loaded from the side.
 
Whatever the installation screen is, once the screen is in the correct position, the pneumatic or mechanical fixture is turned off and the screen is locked. In order to operate more conveniently, many models have a foot controlled version of the folder action, the operator can release his hand to control the screen. Install the finished net, composite coating machine into the corresponding emulsion, you can start coating. Both sides of the device and the screen can be controlled according to the function of the device.
 
There are two types of coating methods, one is screen coating on latex by wetting several times, or in each coating after drying by this method. A polymeric material, such as an adhesive or coating material, on the surface of a material.
It is suitable for the production of soft substrates such as PVC / PE film
Simply put it on the film and glue it. Including coating, drying, winding and tension control.
 
The film can be PVC, PE, pet... Or some paper, such as re peel paper coated with hot melt adhesive

 Compound coater

Main structure character
Compound coater Unwinding: independent tower type double position discharging frame, automatic cutting, air expanding shaft and safety chuck to load and unload the coil, unwinding EPC device;
Compound coater Rewinding: independent tower type double position take-up frame, flying knife cutting, surface coiling, constant tension winding;
Compound coater Gluing: wire roller gluing mode, roller independent motor drive, pneumatic reset;
Compound coater Oven: six section top open high constant temperature drying oven, the whole oven adopts negative pressure design, hot air does not blow out of the oven, large air volume and high air pressure can create low temperature and high wind speed drying mode. The guide roller is driven by single motor and driven by synchronous belt with low noise;
Compound coater Compound: three roll compound press roller device, which can ensure the uniformity of pressing force in the whole area; S-type double cooling roller;
Compound coater The whole machine adopts U-type drive logic controller and adopts PLC to control the whole machine.

contact information
Jiangyin Lida printing and Packaging Machinery Co., Ltd
Address: 683 Xizhang Road, Gushan Town, Jiangyin City, Jiangsu Province
Tel: 0510-86953860
0510-863562587
Fax + 86-0510-86358777
Website: willbefamous.com
E-mail:lida@willbefamous.com