镇江附近想过夜电话联系

Please select the language: chinese / ENGLISH

Key points of solvent free compound machine

Release date: 2017-01-22 08:37

Solventless laminating machine Key points of equipment use
A) The power supply voltage of solventless compound machine is stable, and the voltage fluctuation deviation is not more than 10%.
B) Solvent free compound machine has stable air source and air dryer filter. The compressed air should be clean and dry, and the pressure should not be lower than 0.6MPa.
C) The water of solvent-free laminating machine should be clean and free of scale, and the water pressure should not be less than 4kg, because the compressor is heated to avoid water damage to the compressor.
D) Cleaning and maintenance of solventless laminating machine host is important, especially for plastic coating, composite parts, cleaning plastic coating, composite parts and daily commuting before roller.
E) Solvent free mixer cleaning and maintenance, mixer is the premise and guarantee of solvent-free composite machine. The metering pump is a key component, and you must regularly check whether the metering pump operates normally. Enter the metering pump to keep the compressed air dry. If necessary, dehumidification device should be added. 2、 To prevent the glue pump from clogging, due to the lack of regular cleaning and maintenance, the internal curing glue pump may be blocked, and the glue will cause the wrong use of glue again. If there is a problem, the loss will be huge.
F) The compound machine has to be tested for good solvent free effect. No matter whether the guide roller is soft or not. Clutch coating roller, back pressure roller and compound roller are smooth and synchronous at both ends.
G) Solventless laminating machine Because of the low initial viscosity of the material, the control of tension and winding tension of single component is particularly important. Winding tension mainly includes main volume tension, back tension, secondary winding volume tension, rolling taper and so on. The proper way to check the tension is to stop during the compounding process and draw the "X" character in the composite film on the reel with the blade. If proper operation is to be carried out, if the composite parts are assembled and crimped in one direction and the tension is too high, it should be adjusted reasonably.

 Solventless laminating machine
Main structure character
It has the advantages of high precision winding and unwinding, and can be controlled effectively by using the European composite winding controller;
Coating unit of solventless laminating machine: it adopts high-precision five roll coating method and is driven by high-precision servo motor;
Compound unit of solventless laminating machine: equipped with high precision chrome plating composite roller and built-in multi spiral cooling roller to realize temperature control;
Solventless laminating machine Tension of the whole machine: through the control of the tension swing roller with low friction, short stroke and high rotation, the digital tension control can be realized. The whole machine system can automatically adjust the tension by comparing the set tension with the actual tension.

contact information
Jiangyin Lida printing and Packaging Machinery Co., Ltd
Address: 683 Xizhang Road, Gushan Town, Jiangyin City, Jiangsu Province
Tel: 0510-86953860
0510-863562587
Fax + 86-0510-86358777
Website: willbefamous.com
E-mail:lida@willbefamous.com